Battery Transfer Carriage - Manual Extraction & Powered Lift
BTC-MPPEL
This combination manual extraction and powered lift Battery Transfer Carriage features a hand wheel for extractor arm operation. Raising and lowering is accomplished with a center-mounted hydraulic cylinder controlled by a manual control valve with overload relief for additional safety. Power is supplied by a 12-volt dc hydraulic power unit. Lift range is from 5.5 inches to 21.5 inches (140 millimeters to 546 millimeters).
Download the product PDF above for full specifications.
- Provides safe and easy low cost battery handling extraction
- Versatile standard height adjustment allows battery extraction from most battery compartments
- Power enclosure standard on all electric models allowing easy service and maintenance
- High 3,000 lb (1361 kg) load capacity rating
- Powered models offer quick and easy electric lift
- Large 6″ (152 mm) phenolic wheels help protect floors and provide low rolling resistance
- Many flexible options available to satisfy unique battery handling requirements
*12 volt battery required
- 7″ (178 mm) Cantilever (BTC-CAN-7)
- Extends extractor arm reach an additional 7″ (178 mm). Ideal for use with trucks with outriggers.
- 7″ (178 mm) Cantilever & 6″ (152 mm) Bed Extension (BTC-CAN-7-6)*
- 7″ (178 mm) additional extractor arm reach. 6″ (152 mm) bed extension accommodates longer batteries
- 7″ (178 mm) Cantilever & 8″ (203 mm) Bed Extension (BTC-CAN-7-8)*
- 7″ (178 mm) additional extractor arm reach. 8″ (203 mm) bed extension accommodates longer batteries
- 14″ (356 mm) Cantilever & 6″ (152 mm) Bed Extension (BTC-CAN-14-6)*
- 14″ (356 mm) additional extractor arm reach is ideal for use with outriggers. 6″ (152 mm) bed extension accommodates longer batteries
- Push-Arm Extension (BTC-PA)
- Low cost solution for extending extractor arm an additional 4″ (102 mm) past the standard 6″ (152 mm) extension
- Track Mount (BTC-TM)
- Provides dedicated location for battery change-out
Note: Single Guide Flat Track (SGT-F) is used with the Track Mount option - Rubber Bumpers (BTC-RB)
- Protects lift truck during battery change outs
- Rubber Flap Kit (BTC-RGD)
- Encloses chains and sprockets to prevent dirt and debris from accumulating on or around chains and sprockets
- Self Contained Charger (BTC-CHGR)
- Fully 100 V ac charger for use with powered BTC models
- Extra Capacity (BTC-EC)*
- Increases capacity to 3,400 lb (1542 kg)
Note: Standard capacity is 3,000 lb (1361 kg)
*Consult Factory on this Option
- BTC-18MPPEL (Manual Extraction & Powered Lift, 18″ Wide Compartment)
- BTC-24MPPEL (Manual Extraction & Powered Lift, 24″ Wide Compartment)
- BTC-30MPPEL (Manual Extraction & Powered Lift, 30″ Wide Compartment)
