BTC-MPPEE Battery Transfer Carriage - Powered Extraction & Manual Lift

Battery Transfer Carriage - Powered Extraction & Manual Lift

BTC-MPPEE

Customize

This combination manual lift and powered extraction Battery Transfer Carriage features a hydraulic operated extractor arm. Extraction is accomplished with a heavy-duty hydraulic motor controlled by a manual control valve with overload relief for additional safety. Power is supplied by a 12-volt dc hydraulic power unit. Raising and lowering is accomplished with a center-mounted manual hand jack. Lift range is from 5.5 inches to 23.5 inches (140 millimeters to 597 millimeters).

Call the BHS sales team at 1.800.BHS.9500 to find a dealer near you.

  • Provides safe and easy low cost battery handling extraction
  • Versatile standard adjustment allows battery extraction from most battery compartments
  • Power enclosure standard on all electric models allowing easy service and maintenance
  • High 3,000 lb (1361 kg) load capacity rating
  • Electric models offer quick and easy powered extraction
  • Large 6″ (152 mm) Phenolic wheels help protect floors and provide low rolling resistance
  • Many flexible options available to satisfy your unique battery handling requirements

*12 V battery required

Vacuum Extraction (BTC-VAC)
Vacuum option eliminates the need for manual hook-up and reduces wear and tear on batteries
7″ (178 mm) Cantilever (BTC-CAN-7)
Extends extractor arm reach an additional 7″ (178 mm). Ideal for use with trucks with outriggers.
7″ (178 mm) Cantilever & 6″ (152 mm) Bed Extension (BTC-CAN-7-6)*
7″ (178 mm) additional extractor arm reach. 6″ (152 mm) bed extension accommodates longer batteries
7″ (178 mm) Cantilever & 8″ (203 mm) Bed Extension (BTC-CAN-7-8)*
7″ (178 mm) additional extractor arm reach. 8″ (203 mm) bed extension accommodates longer batteries
14″ (356 mm) Cantilever & 6″ (152 mm) Bed Extension (BTC-CAN-14-6)*
14″ (356 mm) additional extractor arm reach is ideal for use with outriggers. 6″ (152 mm) bed extension accommodates longer batteries
Push-Arm Extension (BTC-PA)
Low cost solution for extending extractor arm an additional 4″ (102 mm) past the standard 6″ (152 mm) extension
Track Mount (BTC-TM)
Provides dedicated location for battery change-out
Note: Single Guide Flat Track (SGT-F) is used with the Track Mount option
Rubber Bumpers (BTC-RB)
Protects lift truck during battery change outs
Rubber Flap Kit (BTC-RGD)
Encloses chains and sprockets to prevent dirt and debris from accumulating on or around chains and sprockets
Self Contained Charger (BTC-CHGR)
Fully enclosed 110 V ac charger for use with powered BTC models
Extra Capacity (BTC-EC)*
Increases capacity to 3,400 lb (1542 kg)
Note: Standard capacity is 3,000 lb (1361 kg)

*Consult Factory on this option

  • BTC-18MPPEE (Powered Extraction & Manual Lift, 18″ Wide Compartment)
  • BTC-24MPPEE (Powered Extraction & Manual Lift, 24″ Wide Compartment)
  • BTC-30MPPEE (Powered Extraction & Manual Lift, 30″ Wide Compartment)