Triple Stack Forklift Battery System Stands

SKU
BS-TS
BHS Triple Stack System Stands (BS-TS) provide the ideal location to charge, store, and exchange lift truck batteries with convenience and ease.

BHS Triple Stack System Stands (BS-TS) provide the ideal location to charge, store, and exchange lift truck batteries with convenience and ease. These heavy-duty, steel-constructed stands complement a Triple Stack Operator Aboard Battery Extractor.

The BS-TS features a welded steel frame with powder coat finish to resist scratches and corrosion in a harsh battery room environment. A rearward pitch and flip-up battery stop keep batteries secure even if heavy vibrations rattle them.

Battery beds feature poly-sleeved rollers that prevent sparking and reduce corrosive buildup. Multiple safety features protect staff members while the ergonomic design allows them to efficiently charge batteries. Over a dozen compartment configurations, safety features, and other options are available to provide custom solutions for your operation.

Optimize your battery room with a Triple Stack System Stand from BHS. Contact our sales team at 1.800.BHS.9500 to learn more about BHS System Stands or to locate a dealer.

Features & Benefits

  • Six spark-proof, poly-sleeved rollers per compartment reduce corrosive build-up and extend product life
  • Models available in various compartment widths to accommodate batteries from 12” to 48” (305 mm to 1219 mm)
  • 40” (1016 mm) standard compartment depth
  • Hitch pin-secured roller axles for ease of maintenance
  • Rearward-pitched battery slots to assist in battery retention
  • Welded system feet anchor to the ground for unfailing stability
  • Durable powder-coat finish resists scratches and corrosion
  • Charger connector mounting holes
  • Charger anchoring slots for securing most makes of chargers
  • Flip-up battery safety stop per compartment
  • Compatible with stainless steel Drip Pans which provide OSHA-compliant spill containment
  • Custom designs available to fit all battery changing requirements
  • Foot pad dimensions: 0.75” x 6” x 8” (19 mm x 152 mm x 203 mm)
  • Charger cable routing holes help protect cables from damage
  • Auxiliary backstops (if required) provide compartment depths from 27.5” to 40” (699 mm to 1016 mm) pending battery specifications*

* Consult Factory

Model

Roller Compartment Width

Frame Width

BS-15-6-TS

15" / 381 mm

38" / 965 mm

BS-15-12-TS

15" / 381 mm

73" / 1854 mm

BS-18-6-TS

18" / 457 mm

44" / 1118 mm

BS-18-12-TS

18" / 457 mm

85" / 2159 mm

BS-21-6-TS

21" / 533 mm

50" / 1270 mm

BS-21-12-TS

21" / 533 mm

97" / 2464 mm

BS-24-6-TS

24" / 610 mm

56" / 1422 mm

BS-24-12-TS

24" / 610 mm

109" / 2769 mm

BS-30-3-TS

30" / 762 mm

38" / 965 mm

BS-30-6-TS

30" / 762 mm

73" / 1854 mm

BS-36-3-TS

36" / 914 mm

44" / 1118 mm

BS-36-6-TS

36" / 914 mm

85" / 2159 mm

BS-42-3-TS

42" / 1067 mm

50" / 1270 mm

BS-42-6-TS

42" / 1067 mm

97" / 2464 mm

BS-48-3-TS

48" / 1219 mm

56" / 1422 mm

BS-48-6-TS

48" / 1219 mm

109" / 2769 mm

Catwalk (BS-CW)
Provides walk area for charger maintenance and comes standard with front rail
Ladder (BS-LDR)
Provides easy access to catwalk used for charger maintenance
End Rail (BS-CW-ER)
Encloses charger servicing area on end of system
Rear Rail (BS-CW-RR)
Encloses charger servicing area on rear of system
Extended Compartment Depth (-46)
Increases roller compartment depth to 46” (1168 mm)
Extended Compartment Depth (-48)
Increases roller compartment depth to 48” (1219 mm)
Extended Compartment Depth (-50)
Increases roller compartment depth to 50” (1270 mm)
Drip Pan (DP)
Contains spills, maintaining a cleaner, safer environment
Poly Lead Roller
Replaces the first roller in each compartment with a polyethylene roller to eliminate potential bearing failure in frequent change-out environments
Rubber Backstop (BS-RBR-STP)
Cushions battery during placement into stand Note: One per stand required, slightly reduces compartment depth
Sliding SB Connector Kit (#80892001)
Allows SB connector to be moved and secured anywhere along the length of the SB connector bracket
Rear Strut Mount (BS-RSM)
Mount vertical style chargers along the rear of multi-level battery stands on a welded strut channel
Top Strut Mount (BS-TSM)
Mount vertical style chargers above multi-level battery stands on a welded strut channel. Adequate clearance required.

California Residents: WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. Learn more here.