Double Stack System Stands
BS-DS
BHS Double Stack System Stands (BS-DS) provide the ideal location to charge, store, and exchange lift truck batteries with convenience and ease. These heavy-duty, steel-constructed stands complement a Double Stack Operator Aboard Battery Extractor to create an optimal battery-charging process.
The rugged BS-DS provides the central infrastructure of a safe and efficient battery room. Its spark-proof, poly-sleeved rollers extend product life and reduce corrosive buildup that can occur from contact with electrolyte residue on industrial batteries.
The Double Stack System Stand features charger-cable routing holes, charger anchoring slots, welded feet, and auxiliary backstops to protect equipment and optimize work flow. The stand securely stores batteries while allowing plentiful access. Over a dozen compartment configurations, safety features, and other options are available to provide custom solutions.
Optimize your changeouts and charging with a Double Stack System Stand from BHS. Contact our sales team at 1.800.BHS.9500 to learn more about Forklift Battery and Charger Stands or to find a local dealer.
- Spark-proof, poly-sleeved rollers reduce corrosive build-up and extend product life
- Models available in various compartment widths to accommodate batteries from 15” to 48” (381 mm to 1219 mm)
- 40” (1016 mm) standard compartment depth
- Hitch pin-secured roller axles for ease of maintenance
- Rearward-pitched battery slots to assist in battery retention
- Welded system feet
- Six rollers per compartment
- Foot pad dimensions: 0.75” x 6” x 8” (19 mm x 152 mm x 203 mm)
- Charger connector mounting holes
- Charger cable routing holes help protect cables from damage
- Charger anchoring slots for securing most makes of chargers
- Auxiliary backstops provide compartment depths from 27.5” to 40” (699 mm to 1016 mm)
- Custom designs available to fit all battery changing requirements
- Catwalk (BS-CW)
- Provides walk area for charger maintenance and comes standard with front rail
- Ladder (BS-LDR)
- Provides easy access to catwalk used for charger maintenance
- End Rail (BS-CW-ER)
- Encloses charger servicing area on end of system
- Rear Rail (BS-CW-RR)
- Encloses charger servicing area on rear of system
- Extended Compartment Depth (-46)
- Increases roller compartment depth to 46” (1168 mm)
- Extended Compartment Depth (-48)
- Increases roller compartment depth to 48” (1219 mm)
- Extended Compartment Depth (-50)
- Increases roller compartment depth to 50” (1270 mm)
- Drip Pan (DP)
- Contains spills, maintaining a cleaner, safer environment
- Poly Lead Roller
- Replaces the first roller in each compartment with a polyethylene roller to eliminate potential bearing failure in frequent change-out environments
- Rubber Backstop (BS-RBR-STP)
- Cushions battery during placement into stand
Note: One per stand required, slightly reduces compartment depth - Sliding SB Connector Kit (#80892001)
- Allows SB connector to be moved and secured anywhere along the length of the SB connector bracket
- Rear Strut Mount (BS-RSM)
- Mount vertical style chargers along the rear of multi-level battery stands on a welded strut channel
- Top Strut Mount (BS-TSM)
- Mount vertical style chargers above multi-level battery stands on a welded strut channel. Adequate clearance required.
- BS-15-4-DS (Four 15″ wide compartments)
- BS-15-8-DS (Eight 15″ wide compartments)
- BS-18-4-DS (Four 18″ wide compartments)
- BS-18-8-DS (Eight 18″ wide compartments)
- BS-21-4-DS (Four 21″ wide compartments)
- BS-21-8-DS (Eight 21″ wide compartments)
- BS-24-4-DS (Four 24″ wide compartments)
- BS-24-8-DS (Eight 24″ wide compartments)
- BS-30-2-DS (Two 30″ wide compartments)
- BS-30-4-DS (Four 30″ wide compartments)
- BS-36-2-DS (Two 36″ wide compartments)
- BS-36-4-DS (Four 36″ wide compartments)
- BS-42-2-DS (Two 42″ wide compartments)
- BS-42-4-DS (Four 42″ wide compartments)
- BS-48-2-DS (Two 48″ wide compartments)
- BS-48-4-DS (Four 48″ wide compartments)
